1″ Electronic Piusi K600B/3P Oval Gear Pulse Flow Meter – With Display – F00492000

Description

This 1″ Oval Gear Pulse Meter Piusi  is part of a wide range of flow meters we offer. Since 1953, PIUSI has been a leading player in the fluid handling sector, offering a complete range of fluid transfer products. Italian quality and engineering at a cost-effective price point for private operators in agriculture, automotive, and road transport worldwide. Piusi stands for Fluid Handling Innovation.

The Piusi K600B/3PM is an aluminium-bodied oval geared flow meter with an electronic display and integral pulsed output. This flow meter has a built-in pulser select 1, 2, 5, 10, 10, 50 or 100:1, which connects it to most fuel management systems (FMS). This Piusi branded pulse flow meter connects a low-cost fuel pump set/kit to a fuel management system (FMS). This pulse meter connects both units, enabling the fuel management system (FMS) to report the usage of the fluid dispensed. The electronic display gives you a local reading of the dispensed fluid and connects to a separate fuel management system (FMS) via its pulsed output. It offers higher accuracy than similar flow meters at +/-0.5%.

Why Buy

• High-accuracy +/-0.5% with electronic display and pulser
• Connects a fuel pump and meter set/kit to a fuel management system (FMS)
• Suitable with diesel and HVO
• Aluminium body, oval geared pulse meter with local display
• Cost-effective way for customers to keep an eye on the fuel they are dispensing via the FMS reports or via the electronic display
• The dispensed fluid is connected to a separate fuel management system (FMS) via its pulsed output
• Enables the fuel management system (FMS) to report the usage of the fluid dispensed and has a local display
• Can be used with an electric dispensing pump

Key Features and Benefits

• Robust oval geared pulse flow meter with electronic display
• Pulse meter, select 1, 2, 5, 10, 10, 50 or 100:1 pulses per litre with a large 80mm electronic display
• Suitable with diesel and HVO
• Connects to a separate fuel management system (FMS) via its pulsed output to see the amount dispensed
• Pulser: Reed switch (does not need an independent power supply)
• Single channel, select 1, 2, 5, 10, 10, 50 or 100:1 pulses per litre
• Max current: 100Ma
• Max voltage: 28V
• Powered by 4 batteries or no power required, can be powered by a fuel management system which eliminates the need for batteries. 6 -24V DC.
• Designed to fit in line with the delivery pipework
• Flow rate 10 – 100 litres per minute
• 1″ BSP female parallel ports, flanged inlet/outlet
• Inlet strainer 400 micron
• Aluminium body
• Weatherproof to IP65
• Accuracy +/-0.5% after calibration
• Front face can be rotated in 90-degree increments, changing the direction of flow
• Maximum pressure 426psi (30 bar)
• Register 5-digit resettable, shows up to 99999 litres
• 8-digit non resettable totaliser
• Working temperature -10°c/+60°c

Options

• Alternative meter, no display Tecalemit (FMOGABP) lower flow