1″ Tecalemit FM0GOBP Oval Gear Pulse Flow Meter For AdBlue®/DEF, Water, Antifreeze & Diesel,/HVO – No Display – 253400040

Description

HYTEK is a UK-approved service TECALEMIT fuel management systems (FMS) and technical centre that provides ongoing support. TECALEMIT is a manufacturer of high quality, fluid handling systems. Aiming to serve and support customers with the best solution to fulfil today’s and tomorrow’s market needs. The TECALEMIT brand was established in 1922, manufacturing systems for measuring, controlling and dispensing fuels and AdBlue®. The TECALEMIT brand’s products are widely used for refuelling solutions in workshops, fleet management, and agriculture.

We added this TECALEMIT pulse flow meter to the HYTEK pulse flow meter range as it offers higher accuracy than similar flow meters at +/-0.5%. It can be used with AdBlue®, water, antifreeze, diesel and HVO. It operates in the flow rate range of 2 – 30 litres per minute. Has a PEEK thermoplastic body with robust oval gears with an 100:1 pulsed output. This flow meter connects to most fluid management systems (FMS). This TECALEMIT branded pulse flow meter connects a low-cost AdBlue® or water pump and meter set/kit to a fluid management system (FMS). This pulse meter connects both units, enabling the fluid management system (FMS) to report the usage of the fluid dispensed. No display; the dispensed fluid amounts are connected to a separate fuel management system (FMS) via its 100:1 pulsed output.

Why Buy

• High accuracy +/-0.5% (many other pulse meters are only accurate to +/-0.5%)
• Connects a low cost AdBlue® or water pump and meter set/kit to a fuel management system (FMS)
• Cost-effective way for customers to keep an eye on the fluid they are dispensing via the FMS reports
• No display, the dispensed fluid is connected to a separate fluid management system (FMS) via its 100:1 pulsed output
• Enables the fuel management system (FMS) to report the usage of the fluid dispensed
• Can be used with an electric dispensing pump
• Easy to remove stainless steel back plate for servicing

Key Features and Benefits

• Pulse meter, 100:1 pulses per litre
• Suitable with AdBlue®, antifreeze, water, diesel & HVO
• No display, connects to a separate fluid management system (FMS) via its 100:1 pulsed output to see the amount dispensed
• Pulser: Reed switch (does not need an independent power supply).
• Single channel, 100 pulses per litre
• Max current: 10Ma
• Max voltage: 5.2V
• No power required, just a 2 wire signal cable (cable not included)
• Designed to fit in line with the delivery hose or pipework, or just before the dispensing nozzle
• Flow rate 2- 30 litres per minute
• 1″ BSP male parallel ports
• Robust oval gear flow meter
• PEEK thermoplastic body
• Weatherproof to IP65
• Accuracy +/-0.5% after calibration
• Front face can be rotated in 90-degree increments, changing the direction of flow
• Maximum pressure 58psi (4 bar)
• Working temperature -10°c/+50°c
• Easy to remove stainless steel back plate for servicing.

Options

• Alternative meter, Piusi for AdBlue® & water (K24.ABP) accuracy only +/-1%
• Alternative meter, Piusi for diesel & HVO (K24.AP) accuracy only +/-1

AdBlue^® is a trademark of the Verband der Automobilindustrie e.V. (VDA).