OLE C2020 Tank Gauge Kit, +/-1%, 5m – 10m

Description

Made in the UK, OLE has been manufacturing high-quality tank gauges since 2001 and became part of HYTEK in 2021. Every OLE unit is designed, assembled, and tested in the UK to ensure reliable performance and long-lasting accuracy.

OLE tank gauges are suitable for all tank shapes and are trusted for their proven, dependable technology. ATEX-certified versions are available for use in hazardous environments, offering added safety and compliance. Depending on the model, accuracy is consistent to within +/-1% (C2020/Z2000/EX2020) or +/-0.25% (T5020/Z5020/EX5020).

Each tank probe uses an electronic pressure sensor with a 1″ BSPT male fitting, designed to be suspended approximately 50mm from the bottom of the tank for optimal readings. The OLE C2020 Tank Gauge Kit (5m-10m) includes the tank gauge housing, pressure sensor, and 1″ tank adaptor, providing everything required for straightforward installation and operation.

Key Features and Benefits

• Suitable with diesel, HVO, biodiesel, AdBlue®, water & antifreeze
• Suits tanks 5m – 10m high
• Other kits available for 0.3m – 3m (C2020-A-C23) & 3m – 5m high tanks (C2020-A-C25)
• Complete kit includes tank gauge & tank probe (pressure sensor)
• Accuracy +/-1% of tank capacity (do not confuse with other lower cost and lower accuracy gauges that are +/-1% of full-scale, on a 4m high tank these other gauges can give a discrepancy of +/- 40mm)
• Can be set up from the front panel
• High & low level sounder
• Probe cable can be extended to 100m (CABLE-4-BLACK)
• LCD display flashes when alarmed
• Electronic display with backlight (turns off after 1 hour)
• 1 gauge required per tank
• Weatherproof to IP55
• Gives continuous readout in litres & shows a % bar
• Power supply can be 230V, 110V or 24VDC
• Includes 4-20mA output. Can connect to a BMS (building management system)

Options

• Choose bund probe/level switch (B8)
• If using the bund probe for AdBlue®, water or antifreeze choose (B8-ADBLUE)
• Water bottom sensor (T4020-B2)
• If extending the probe cable on non ATEX OLE gauges low loss cable must be used (CABLE-4-BLACK)
• We can calibrate your gauge within 24 hours of receiving our tank questionnaire (CALIB-C2020)
• AdBlue^® is a trademark of the Verband der Automobilindustrie e.V. (VDA). HTTPS://WWW.VDA.DE/DE