OLE C2020 Web Enabled Tank Gauge Kit, +/-1%, 0.3m – 3m

Description

The OLE web-enabled C2020 with built-in web logger communicates to our Your Gauge portal, allowing users to remotely track, monitor, and manage their fuel tank levels online — all in one fully integrated gauge solution. Please note SIM and web portal hosing sold separately 

Made in the UK, OLE has been manufacturing high-quality tank gauges since 2001 and became part of HYTEK in 2021. Every OLE unit is designed, assembled, and tested in the UK to ensure reliable performance and long-lasting accuracy.

OLE tank gauges are suitable for all tank shapes and are trusted for their proven, dependable technology. ATEX-certified versions are available for use in hazardous environments, offering added safety and compliance. Depending on the model, accuracy is consistent to within +/-1% (C2020/Z2000/EX2020) or +/-0.25% (T5020/Z5020/EX5020).

Each tank probe uses an electronic pressure sensor with a 1″ BSPT male fitting, designed to be suspended approximately 50mm from the bottom of the tank for optimal readings. The OLE C2020 Tank Gauge Kit (0.3m–3m) includes the tank gauge housing, pressure sensor, and 1″ tank adaptor, providing everything required for straightforward installation and operation.

Key Features and Benefits

• Suitable with diesel, HVO, biodiesel, AdBlue®, water & antifreeze
• Suits tanks 0.3m – 3m high
• Other kits available for 3m – 5m C2020-C25-WEB & 5m -10m high tanks C2020-C25-WEB
• Complete kit includes tank gauge & tank probe (pressure sensor)
• Accuracy +/-1% of tank capacity (do not confuse with other lower cost & lower accuracy gauges that are +/-1% of full-scale, on a 4m high tank these other gauges can give a discrepancy of +/- 40mm)
• High & low level sounder
• Probe cable can be extended to 100m (CABLE-4-BLACK)
• LCD display flashes when alarmed
• Can be set up/calibrated from the front panel
• Electronic display with backlight (turns off after 1 hour)
• 1 gauge required per tank
• Weatherproof to IP65
• Gives continuous readout in litres & shows a % bar
• Power supply can be 230V, 110V or 24VDC
• Includes 4-20mA output. Can connect to a BMS (building management system)

Web Compatibility

• Important – Web Hosting and SIM card rental/management charges not included (12 month contract), then renewal annually Updates the website every 2 hours (as standard).
• All programming can be set up by Hytek (charges apply) – contact us upon delivery to activate your password.Alarm functions and low-level email alerts can be configured. Uses a GPRS modem, and if the signal strength is low, GSM will be used to ensure the data is always transmitted. LED Indicators: Red, Yellow, Green for status, comms, data.
• Data Upload: Sends data to web service Alerts & Reports: Automatic emails, stock reconciliation, usage summaries
• Data can be downloaded, sorted, and analysed as required.
• Simple export to spreadsheets in CSV format, with infinite report generation options.
• A quad-band GSM SIM card is required together with cloud software hosting. Not included (12 month contract) and renewal annually.
• Order separately (WEBHS) 1ST year SIM card and cloud software management/hosting contract fee.
• The housing is weatherproof to IP65.
• Overdue calls are logged by the computer to alert you if no GSM call is received.
• The latest true value data and all historical archived data can be viewed on our file servers.
• Communication: Built-in cellular module (GPRS)
• External Antennas: Optional GSM/GPS antennas (MCSCGA)
• Pre-Programming: Auto-detects devices

Options

• Choose bund probe/level switch (B8)
• If using the bund probe for AdBlue®, water or antifreeze choose (B8-ADBLUE)
• Water bottom sensor (T4020-B2)
• If extending the probe cable (up to 100m) on non ATEX OLE gauges low loss cable must be used (CABLE-4-BLACK)
• We can calibrate your gauge within 24 hours of receiving our tank questionnaire (CALIB-C2020)
• AdBlue^® is a trademark of the Verband der Automobilindustrie e.V. (VDA). https://www.vda.de/de