SKU: EX2020-a12

OLE EX2020 Tank Gauge Kit – Zone 2 ATEX Certified, +/-1%

Manufactured by OLE

The EX2020 Tank Gauge Kit (ATEX Certified) is accurate to +/-1% and includes the tank gauge housing, pressure sensor, and 1″ tank adaptor, providing everything required for straightforward installation and operation. The gauge housing is suitable for zone 2.

View Full Description
View Full Description

Talk To Our Experts About This Product

+44 (0) 1279 815 600

This product is covered by a 1 year manufacturer warranty.

EX2020 Technical Data
Download

Talk To Our Experts About This Product

+44 (0) 1279 815 600

Manufactured by OLE

This product is covered by a 1 year manufacturer warranty.

EX2020 Technical Data
Download

Description

Made in the UK, OLE has been manufacturing high-quality tank gauges since 2001 and became part of HYTEK in 2021. Every OLE unit is designed, assembled, and tested in the UK to ensure reliable performance and long-lasting accuracy. OLE tank gauges are suitable for all tank shapes and are trusted for their proven, dependable technology. ATEX-certified versions are available for use in hazardous environments, offering added safety and compliance. Depending on the model, accuracy is consistent to within +/-1% (C2020/Z2000/EX2020) or +/-0.25% (T5020/Z5020/EX5020). Each tank probe uses an electronic pressure sensor with a 1" BSPT male fitting, designed to be suspended approximately 50mm from the bottom of the tank for optimal readings. This ATEX certified EX2020 kit includes the tank gauge housing and tank pressor sensor with 1" tank adaptor.

Key Features and Benefits

  • This EX2020 tank gauge kit is ATEX certified, gauge housing is suitable for zone 2, tank probes are rated for zone 0 & 1
  • Suitable with petrol, kerosene, diesel, biodiesel, AdBlue®, antifreeze & water
  • Complete kit includes tank gauge & tank probe to suits tanks 0.3m - 3m
  • Accuracy +/-1% of tank capacity (do not confuse with other lower cost and lower accuracy gauges that are +/-1% of full-scale, on a 4m high tank, these other gauges can give a discrepancy of +/- 40mm)
  • Can be set up from the front panel
  • High & low level sounder
  • LCD display flashes when alarmed
  • Electronic display with backlight (turns off after 1 hour)
  • 1 gauge required per tank
  • Weatherproof to IP55
  • Gives continuous readout in litres & shows a % bar
  • Power supply can be 230V, 110V or 24VDC
  • Includes 4-20mA output. Can connect to a BMS

Options

  • Choose bund probe (B8-ATEX) or water bottom sensor (B2-ATEX)
  • Junction box, used to extend cable (T4020-EJ) & low loss vented cable (CABLE.4CV)
  • Probe cable can be extended to 100m (CABLE.4CV)
  • We can calibrate your gauge within 24 hours of receiving our tank questionnaire (CALIB-Z2000)
AdBlue®is a trademark of the Verband der Automobilindustrie e.V. (VDA). https://www.vda.de/de

Interested In Using This Product As Part Of A Project?

Our Team Of Experts Can Craft A Bespoke Solution

Get in touch with our knowledgeable experts in fluid transfer solutions for personalised advice and solutions, always tailored to meet your specific fluid transfer needs.

View Special Projects

Description

Made in the UK, OLE has been manufacturing high-quality tank gauges since 2001 and became part of HYTEK in 2021. Every OLE unit is designed, assembled, and tested in the UK to ensure reliable performance and long-lasting accuracy.

OLE tank gauges are suitable for all tank shapes and are trusted for their proven, dependable technology. ATEX-certified versions are available for use in hazardous environments, offering added safety and compliance. Depending on the model, accuracy is consistent to within +/-1% (C2020/Z2000/EX2020) or +/-0.25% (T5020/Z5020/EX5020).

Each tank probe uses an electronic pressure sensor with a 1″ BSPT male fitting, designed to be suspended approximately 50mm from the bottom of the tank for optimal readings. This ATEX certified EX2020 kit includes the tank gauge housing and tank pressor sensor with 1″ tank adaptor.

Key Features and Benefits

  • This EX2020 tank gauge kit is ATEX certified, gauge housing is suitable for zone 2, tank probes are rated for zone 0 & 1
  • Suitable with petrol, kerosene, diesel, biodiesel, AdBlue®, antifreeze & water
  • Complete kit includes tank gauge & tank probe to suits tanks 0.3m – 3m
  • Accuracy +/-1% of tank capacity (do not confuse with other lower cost and lower accuracy gauges that are +/-1% of full-scale, on a 4m high tank, these other gauges can give a discrepancy of +/- 40mm)
  • Can be set up from the front panel
  • High & low level sounder
  • LCD display flashes when alarmed
  • Electronic display with backlight (turns off after 1 hour)
  • 1 gauge required per tank
  • Weatherproof to IP55
  • Gives continuous readout in litres & shows a % bar
  • Power supply can be 230V, 110V or 24VDC
  • Includes 4-20mA output. Can connect to a BMS

Options

  • Choose bund probe (B8-ATEX) or water bottom sensor (B2-ATEX)
  • Junction box, used to extend cable (T4020-EJ) & low loss vented cable (CABLE.4CV)
  • Probe cable can be extended to 100m (CABLE.4CV)
  • We can calibrate your gauge within 24 hours of receiving our tank questionnaire (CALIB-Z2000)

AdBlue®is a trademark of the Verband der Automobilindustrie e.V. (VDA). https://www.vda.de/de

Additional information