Description

Since 1953, PIUSI has been a leading player in the fluid handling sector, offering a complete range of fluid transfer products. Italian quality and engineering at a cost-effective price point for private operators in agriculture, automotive, and road transport worldwide. Piusi stands for Fluid Handling Innovation.

Hytek have been offering the Piusi range since 1989. The Piusi K24.ABP has a polyamide body with a polypropylene turbine with an 88:1 pulsed output This flow meter connects to most fluid management systems (FMS). This Piusi branded pulse flow meter connects a low-cost AdBlue® or water pump and meter set/kit to a fluid management system (FMS). This pulse meter connects both units, enabling the fluid management system (FMS) to report the usage of the fluid dispensed. No display; the dispensed fluid amounts are connected to a separate fuel management system (FMS) via its 88:1 pulsed output. 

Why Buy:

• Connects a low cost AdBlue® or water pump and meter set/kit to a fuel management system (FMS)
• Cost-effective way for customers to keep an eye on the fluid they are dispensing via the FMS reports
• No display, the dispensed fluid is connected to a separate fluid management system (FMS) via its 88:1 pulsed output
• Enables the fuel management system (FMS) to report the usage of the fluid dispensed
• Can be used with an electric dispensing pump

Key features and Benefits:

• Pulse meter, 88 pulses per litre
• Suitable with AdBlue® or water
• No display, connect to a separate fluid management system (FMS) via its 88:1 pulsed output to see the amount dispensed
• Pulser: Reed switch (does not need an independent power supply).
• Single channel, 88 pulses per litre
• Max current: 100Ma
• Max voltage: 28V
• No power required, just a 2 wire signal cable (cable not included)
• Designed to fit in line with the delivery hose or pipework, or just before the dispensing nozzle
• Flow rate 6 – 100 litres per minute
• 1″ BSP female – male parallel ports
• Robust turbine flow meter
• Polyamide body with polypropylene turbine
• Weatherproof to IP65
• Accuracy +/-1% after calibration
• Front face can be rotated in 90-degree increments, changing the direction of flow
• Maximum pressure 145psi (10 bar)
• Working temperature -10°c/+50°c

Options

• Alternative meter, Tecalemit, better accuracy to +/-0.5% (FMOGABP) 
• If no pulser is required, with display (K24.AB) 

AdBlue® is a trademark of the Verband der Automobilindustrie e.V. (VDA). http://www.vda.de