Description

Since 1953, PIUSI has been a leading player in the fluid handling sector, offering a complete range of fluid transfer products. Italian quality and engineering at a cost-effective price point for private operators in agriculture, automotive, and road transport worldwide. Piusi stands for Fluid Handling Innovation.

The Piusi K600/4PM is a high flow 1½” aluminium-bodied oval geared flow meter with pulsed output. This flow meter has a built-in pulser (26:1), which allows it to connect to most fuel management systems (FMS). This Piusi branded pulse flow meter connects a low-cost fuel pump and meter set/kit to a fuel management system (FMS). This pulse meter connects both units, enabling the fuel management system (FMS) to report the usage of the fluid dispensed. No display; the dispensed fluid is connected to a separate fuel management system (FMS) via its 26:1 pulsed output. It offers higher accuracy than similar flow meters at +/-0.5%.

Why Buy:

• High-accuracy +/-0.5% and high flow 15 – 150 litres per minute
• Connects a low cost fuel pump and meter set/kit to a fuel management system (FMS)
• Suitable with diesel, HVO, biodiesel up to B20 and antifreeze
• Cost-effective way for customers to keep an eye on the fuel they are dispensing via the FMS reports
• Aluminium body, oval geared pulse meter
• No display, the dispensed fluid is connected to a separate fuel management system (FMS) via its 26:1 pulsed output
• Enables the fuel management system (FMS) to report the usage of the fluid dispensed
• Can be used with an electric dispensing pump

Key features and Benefits:

• High flow pulse meter, 26 pulses per litre
• Suitable with diesel, HVO, biodiesel up to B20, oil and antifreeze
• No display, connects to a separate fuel management system (FMS) via its 26:1 pulsed output to see the amount dispensed
• Pulser: Reed switch (does not need an independent power supply)
• Single channel, 26 pulses per litre
• Max current: 100Ma
• Max voltage: 28V
• No power required, just a 2 wire signal cable (cable not included)
• Designed to fit in line with the delivery pipework
• Flow rate 15 – 150 litres per minute
• 1½” BSP female parallel ports, flanged inlet/outlet
• Inlet strainer 400 micron
• Robust oval geared pulse flow meter
• Aluminium body 
• Weatherproof to IP65
• Accuracy +/-0.5% after calibration
• Maximum pressure 284psi (20 bar)
• Working temperature -10°c/+60°c
• Weight: 3.2kg

Options

• Alternative meter, lower flow rate with 1″ ports, no display Tecalemit (FMOGABP) 
• Alternative electronic display version with pulser,  lower flow rate with 1″ port (K600B/3P)